Moisture Solutions


Uzin PE 460 Epoxy Based Moisture Barrier

Product Data Sheet Link

  • No Limit on Moisture Vapor

  • Rapid Drying

  • Alkali resistant - meets ASTM D1308

  • Water and solvent free - meets strict EMICODE EC 1 R PLUS criteria (healthy indoor air quality)

2-component epoxy resin moisture vapor retarder and surface hardening primer for concrete substrates with high residual moisture.This product requires preparation of concrete to a CSP 3 roughness standard. Suitable for/on/as:

Fast track installations with the addition of UZIN Epoxy Accelerator (approx. 3 1/2 hour dry time)

A vapor retarder/primer for use up to 100% RH on scarified, very dense or smooth concrete

A surface hardening primer on absorbent substrates, such as gypsum products and concrete

A bonding agent on abraded ceramic tile, stone and terrazzo surfaces, existing substrates with well-bonded adhesive residues, smoothing compounds and coatings including water-soluble adhesive residues


CT 230 - KOSTER VAP I 2000 Zero VOC

Product Data Sheet Link

The KOSTER VAP I 2000 Zero VOC is a VOC free one-coat moisture vapor control system consisting of a unique combination of epoxy resins and other chemical compounds. KOSTER I 2000 Zero VOC is formulated to prevent floor failures on concrete slabs with elevated levels of moisture vapor emission.

KOSTER VAP I 2000 Zero VOC is VOC free and is compliant with all state and federal VOC regulations. KOSTER VAP I 2000 Zero VOC allows instillation in sensitive areas such as hospitals, schools and grocery stores. LEED Indoor Environmental Quality Credits are available for EG 4.2 (Low-Emitting Materials, Paints and Coatings).


Uzin PE 260 Substrate Primer

Product Data Sheet Link

  • Existing surfaces requiring refurbishment, such as well-bonded, non-water-soluble adhesive residues and leveling compounds

  • Soundly attached plywood, OSB or other suitable wood substrates

  • Thin well-bonded cutback adhesive residues

  • Radiant floor heating systems

Properties:

  • Ready to use - can be applied undiluted or diluted depending on surface absorbency

  • Highly concentrated

  • High solids content - superior bonding on most substrates, won't re-emulsify when leveling compound is applied.

  • Solvent free - meets strict EMICODE EC 1 PLUS criteria (healthy indoor air quality and very low emission)

Important Notes:

  • Not suitable for use as a moisture retarder on concrete substrates. Select a suitable UZIN moisture vapor retarder.

  • Not suitable for application over water-soluble adhesive residues. When priming over water soluble adhesive residues, select a suitable UZIN primer / moisture vapor retarder.

  • Not suitable as a primer beneath wood flooring adhesives.




Uzin RR 185 Loose Laid Sheet Membrane

Product Data Sheet Link

  • Accepts various floor finishes, including ceramics

  • Peace of mind installation

  • Floating product, unlike wet applied mitigation

  • Existing floor coverings can easily be covered

  • Covered floors can be reinstated, damage free

  • Costly demolition can be avoided

  • Reduced install time allows cost savings

  • Surrounding floor transitions can easily be met

  • Ideal for use with UZIN KE 2000 S adhesive

  • Flooring replacement can be made same day

  • Reduced possibility of seams telegraphing

Important Notes:

  • UZIN RR 185 is not designed for heavy rolling loads eg. fork lifts, pallet jacks, hospital beds etc. Damage caused to installed finish floor coverings by high / spiked heels, improper protectors, castors, furniture rests etc

  • UZIN RR 185 is not suitable for broadloom carpeting requiring a crab stretcher, nailing or heavy knee kicking to align seams.

  • UZIN RR 185 is not suitable for receiving rubber sheet or rubber tile floor coverings.

For more information on this product please visit the UZIN Website.


Taylor Dynamic- 99RH Moisture Adhesive

Product Data Sheet Link

  • Carpet tile (hard-and soft-backed)

  • Sheet goods (vinyl, homogeneous, heterogeneous, fiberglass)

  • Rubber (tile and sheet)

  • WPC/WSC

  • Cork-backed hard surface

  • Cork underlayment

  • VCT/VET

  • Broadloom carpet (breathable and vinyl-backed)

  • Carpet cushion to  substrate

  • Stair treads (rubber and vinyl)


Spraylock Moisture Adhesive

• No trowel marks
• Immediate access to traffic
• Low profile

• Wax and finish floors immediately
• Instant shear strength
• Reduces work-related injuries

Spray-Lock Luxury Vinyl Tile adhesive range provides numerous benefits for installation of vinyl tile flooring such as instant shear strength, instant access to vinyl floor and a long open time. Our unique eco friendly LVT adhesive spray solutions speed up the time required to apply floor tile adhesive by up to 50%. Our unique vinyl adhesive formula is specifically designed and tested on over 600 different LVT products to ensure superior adhesion for your LVT, Plank and Vinyl tile installation.

Luxury vinyl planks and tiles (LVT) are quickly becoming the fastest growing flooring options in both commercial and residential installations due to the low cost, durability and variety of designs. Spray-Lock 6500 Vinyl Spray adhesive for LVT flooring can reduce overall cost per square foot and keep projects ahead of schedule. For high moisture substrates, Spray-Lock offers 6500 Platinum as a reliable solution. It has taken one national account’s moisture failure rate of 23% down to less than 1% over a span of 300 million square feet. 

Important Notes:

  • This product is designed to reduce moisture vapor transmission from concrete substrates. It will NOT prevent damage to the flooring caused by lack of moisture control from other sources. All other sources of moisture caused by leaks, broken pipes, poor drainage, subsurface hydro-logic factors, etc., must be eliminated prior to installation.

 
0603525-VAP-2000.jpg
 
 
 
render-dynamic.png
 
download (3).png
 

Shaw Lokdots

LokDots™ is ideal for installing EcoWorx carpet tile in high moisture environments. As long as there are no visible signs of moisture present, no moisture testing is needed to install LokDots. It can also be installed over any substrate, including concrete, VCT, VAT, cutback, wood and more.

Mohawk Flexlok tabs

Dealing with a high moisture slab?  Not a problem for FlexLok.  Using the Flexlok system on our NXT backing enables you to install over 95% RH slabs with no sealer. The FlexLok system doesn’t try to hold the tile to the floor but rather locks each tile to the one surrounding it, creating a floating floor.

Flexlok_JAN2015_V1-1-e1422598179222.jpg
maxresdefault (2).jpg

Interface Tactiles

The backings of our tiles hug the floor. TacTiles connect them horizontally, creating a ‘floating floor’ that doesn’t shrink or expand. That’s how we eliminate the need for glue. No damage to the subfloor and no sticky mess during the installation. In short, TacTiles make installing modular flooring easy, quick and clean.

wc_am-madetomatchheader2.jpg
wc_eu-tactilessix-gal.jpg

Milliken Tractionback 

TractionBack® is a remarkable high-friction coating that keeps our PVC-free carpet tile securely in-place without additional adhesives, floor sealers or primers. Applied during the manufacturing process, carpet tiles with TractionBack require no manipulation, additional taping, or gluing steps in the field. Ready to install out of the box makes installation, moving, or replacing Milliken carpet easier on you and the environment.  

TractionBack_Remix.jpg

Mohawk PermaLink System

PermaLink® from the Mohawk Group is a unique adhesive film that allows new carpet tile to install directly on top of the previous carpet; engineered to last for multiple installations

  • Immediate access for light traffic (PSA)

  • ColorReady® technology improves install accuracy

  • High-strength, waterproof bond

  • PSA performance with hard-set resilience

  • LEED v4 contributing

    • CDPH/EHLB Standard Method v1.2

    • Meets SCAQMD Rule 1168, 11 g/L

    • Does not contain methylene chloride and perchloroethylene

    • Contributes to low emitting materials